A method to find optimal locations and properties of anti-noise actuators in local noise control system is considered. The local noise control performance is approximated by a finite element method based approach, that attempts to estimate the average performance of optimal active noise control (ANC) system. The local noise control uses a fixed number of circular actuators that are located on the boundary of a three-dimensional enclosed acoustic space. Actuator signals are used to minimize the known harmonic noise at specified locations. The average noise reduction is maximized at two frequency ranges by adjusting the anti-noise actuator configuration, which is a non-linear multi-objective optimization problem. To solve the optimization problem, unsorted population size evolutionary optimization algorithm (UPS-EMOA) is considered, and its performance is compared to the widely-known NSGA-II method. As a numerical example problem, ANC in a passenger car cabin is considered. A significantly better noise control is obtained with the optimized actuator locations than only by a engineer’s sophisticated guess.